Mplayer cdda windows

For more information about codecs, see Codecs: frequently asked questions. Windows 7 Windows Media Player More Need more help? Join the discussion. Was this information helpful? Yes No. Thank you! Sets the TV norm to the given numeric ID. The TV norm depends on the capture card.

See the console output for a list of available TV norms. Set names for channels. NOTE: If is an integer greater than , it will be treated as frequency in kHz rather than channel name from frequency table. Not compatible with the frequency parameter. By default, the count of recorded audio channels is determined automatically by querying the audio mode from the TV card. This can be used for troubleshooting when the TV card is unable to report the current audio mode.

Set an audio device. These options set parameters of the mixer on the video capture card. They will have no effect, if your card does not have one.

For v4l2 50 maps to the default value of the control, as reported by the driver. Set gain control for video devices usually webcams to the desired value and switch off automatic control.

A value of 0 enables automatic control. If this option is omitted, gain control will not be modified. A value of 0 means capture and buffer audio and video together default for MEncoder. A value of 1 default for MPlayer means to do video capture only and let the audio go through a loopback cable from the TV card to the sound card.

When using this option, you do not need to specify the width and height of the output window, because MPlayer will determine it automatically from the decimation value see below. Choose the quality of the JPEG compression 0: opaque 1: transparent 2: opaque with inverted colors 3: transparent with inverted colors.

Specify default teletext language code default: 0 , which will be used as primary language until a type 28 packet is received. Useful when the teletext system uses a non-latin character set, but language codes are not transmitted via teletext type 28 packets for some reason.

To see a list of supported language codes set this option to Terminate stream with video renderer instead of Null renderer default: off. Will help if video freezes but audio does not.

NOTE: May not work with -vo directx and -vf crop combination. Terminate VideoPort pin stream with video renderer instead of removing it from the graph default: off. Useful if your card has a VideoPort pin and video is choppy.

Use the system clock as sync source instead of the default graph clock usually the clock from one of the live sources in graph. Create audio chunks with a time length equal to video frame time length default: off. Some audio cards create audio chunks about 0. Tune the TV channel scanner. Specify delay in seconds before switching to next channel default: 0. Lower values will cause faster scanning, but can detect inactive TV channels as active. Threshold value for the signal strength in percent , as reported by the device default: A signal strength higher than this value will indicate that the currently scanning channel is active.

Force audio parameters for the VIVO demuxer for debugging purposes. NOTE: Also see -vf expand. You may also want to use -embeddedfonts. To disable it, use -nofontconfig. Sets the border outline color for text subtitles. Adds a black band at the bottom of the frame. The same, but hinting will only be performed if the OSD is rendered at screen resolution and will therefore not be scaled. The default value is 7 use native hinter for unscaled OSD and no hinting otherwise.

Adds a black band at the top of the frame. Enables placing toptitles and subtitles in black borders when they are available. Convert the given subtitle specified with the -sub option to the time-based JACOsub subtitle format. Creates a dumpsub. Convert the given subtitle specified with the -sub option to the MicroDVD subtitle format.

Creates a dump. Convert the given subtitle specified with the -sub option to the time-based SAMI subtitle format. Convert the given subtitle specified with the -sub option to the time-based SubViewer SRT subtitle format. Dumps the subtitle substream from VOB streams.

Enables extraction of Matroska embedded fonts default: disabled. Use this if commas in subtitles are shown at the start of a sentence instead of at the end. With Fontconfig, this option determines the Fontconfig font pattern. Enables the usage of fontconfig managed fonts default: autodetect. With -fontconfig it is used for both libass and OSD, with -nofontconfig it is not used at all, i.

Display only forced subtitles for the DVD subtitle stream selected by e. Indicate the file that will be used to load palette and frame size for VOBsub subtitles. Turns off automatic subtitle file loading. Note: VOBsub subtitles are not affected. Set how fractions of seconds of the current timestamp are printed on the OSD:. Show approximated frame count within current second. This frame count is not accurate but only an approximation.

For variable fps, the approximation is known to be far off the correct frame count. Allows the next subtitle to be displayed while the current one is still visible default is to enable the support only for specific formats. Specify the vertical alignment of the progress bar 0: top, bottom, default is 50, i. Display the subtitle stream specified by MPlayer prints the available subtitle IDs when run in verbose -v mode.

If you cannot select one of the subtitles on a DVD, also try -vobsubid. Disables any otherwise auto-selected internal subtitles as e. Use -noautosub to disable the loading of external subtitle files. Specify a priority list of subtitle languages to use. A value of 16 may be added to in order to force scaling even when original and scaled frame size already match. This can be employed to e.

Available modes are:. Variance parameter of gaussian used by -spuaa 4. Higher means more blur default: 1. Only one file can be displayed at the same time. Specify the alpha channel value for subtitles and OSD backgrounds. Big values mean more transparency. Specify the color value for subtitles and OSD backgrounds. Currently subtitles are grayscale so this value is equivalent to the intensity of the color. Force subtitle demuxer type for -subfile. Give the demuxer name as printed by -sub-demuxer help.

For backward compatibility it also accepts the demuxer ID as defined in subreader. Adjust matching fuzziness when searching for subtitles does not apply to VOBsub :. Disables any kind of text post processing done after loading the subtitles. Used for debug purposes. Specify which edge of the subtitles should be aligned at the height given by -subpos.

CC subtitles have not been spotted on DVDs from other regions so far. If your system supports iconv 3 , you can use this option to specify the subtitle codepage. It takes priority over both -utf8 and -unicode. You can specify your language using a two letter language code to make ENCA detect the codepage automatically.

If unsure, enter anything and watch mplayer -v output for available languages. Fallback codepage specifies the codepage to use, when autodetection fails. Guess the encoding, assuming the subtitles are Czech, fall back on latin 2, if the detection fails. Currently useless. Same as -audiofile, but for subtitle streams OggDS?

Sets the subtitle font see -font. If no -subfont is given, -font is used. Sets the autoscale mode. Sets the font encoding. Sets the subtitle text autoscale coefficient as percentage of the screen size default: 5. Specify the framerate of the subtitle file default: movie fps. Specify the position of subtitles on the screen. Values larger than allow part of the subtitle to be cut off. Specify the maximum width of subtitles on the screen. Useful for TV-out. Disable the display of OSD messages on the console when no video output is available.

Specify the escape sequence to use before writing an OSD message on the console. Tells MPlayer to handle the subtitle file as unicode. It will only take effect if neither -subcp nor -utf8 is given. Specify the path to the unrar executable so MPlayer can use it to access rar-compressed VOBsub files default: not set, so the feature is off. Specify a VOBsub file to use for subtitles.

Has to be the full pathname without extension, i. Select the sample format used for output from the audio filter layer to the sound card. The values that can adopt are listed below in the description of the format audio filter. For ALSA this is the mixer name. This option will tell MPlayer to use a different channel for controlling volume than the default PCM.

Options for OSS include vol, pcm, line. For ALSA you can use the names e. Force the use of the software mixer, instead of using the sound card mixer. Set the maximum amplification level in percent default: A value of will allow you to adjust the volume up to a maximum of double the current level.

Set the step size of mixer volume changes in percent of the whole range default: 3. Set the startup volume in the mixer, either hardware or software if used with -softvol. A value of -1 the default will not change the volume. Audio output drivers are interfaces to different audio output facilities.

The syntax is: -ao. Suboptions are optional and can mostly be omitted. NOTE: See -ao help for a list of compiled-in audio output drivers. Sets the device name. Automatically create connections to output ports default: enabled. When enabled, the maximum number of output channels will be limited to the number of available output ports. Useful if you want to have certain connections established automatically.

Estimate the audio delay, supposed to make the video playback smoother default: enabled. Automatically start jackd if necessary default: disabled. Note that this seems unreliable and will spam stdout with server messages. Specify the host and optionally output sink to use. An empty string uses a local connection, "localhost" uses network transfer most likely not what you want.

You can also explicitly force the workaround for broken pause functionality default: autodetected. Sets the device number to use. Playing a file with -v will show a list of available devices. DVB card to use if more than one card is present. If not specified MPlayer will search the first usable card. Produces no audio output but maintains video playback speed. Use -nosound for benchmarking.

Include or do not include the wave header default: included. When not included, raw PCM will be generated. Write the sound to instead of the default audiodump. If nowaveheader is specified, the default is audiodump. Try to dump faster than realtime. Make sure the output does not get truncated usually with "Too many video packets in buffer" message. Set the graphics card that will receive the image. You can get a list of available cards when you run this option with -v. Currently only works with the directx video output driver.

Override the autodetected color depth. Only supported by the fbdev, dga, svga, vesa video output drivers. Play movie with window border and decorations. Since this is on by default, use -noborder to disable the standard window decorations. Adjust the brightness of the video signal default: 0.

Not supported by all video output drivers. Adjust the contrast of the video signal default: 0. Specify the hostname and display number of the X server you want to display on. Turns on direct rendering not supported by all codecs and video outputs. This can result in significantly faster blitting on some systems, on most the difference will be minimal.

In some cases, particularly with decoders specifying their buffer requirements badly, it can be vastly slower. Adjust the overlay size h,w and position x,y in case it does not match the window perfectly default: 0. Fullscreen playback centers movie, and paints black bands around it.

Specify a priority list of fullscreen modes to be used. If you experience problems like the fullscreen window being covered by other windows try using a different order. NOTE: See -fstype help for a full list of available modes.

Default order, will be used as a fallback if incorrect or unsupported modes are specified. Specify extra borders in full screen mode. The number of pixels is specified in terms of screen resolution. Currently only supported with by the gl video output driver. Adjust the gamma of the video signal default: 0. Adjust where the output is on the screen initially.

The x and y specifications are in pixels measured from the top-left of the screen to the top-left of the image being displayed, however if a percentage sign is given after the argument it turns the value into a percentage of the screen size in that direction.

It also supports the standard X11 -geometry option format, in which e. If an external window is specified using the -wid option, then the x and y coordinates are relative to the top-left corner of the window rather than the screen. This tells the GUI to also use an X11 window and stick itself to the bottom of the video, which is useful to embed a mini-GUI in a browser with the MPlayer plugin for instance. Adjust the hue of the video signal default: 0. You can get a colored negative of the image with this option.

Set the aspect ratio of your monitor or TV screen. A value of 0 disables a previous setting e. Overrides the -monitorpixelaspect setting if enabled. Set the aspect of a single pixel of your monitor or TV screen default: 1.

A value of 1 means square pixels correct for almost? Disables double buffering, mostly for debugging purposes. Double buffering fixes flicker by storing two frames in memory, and displaying one while decoding another. Do not grab the mouse pointer after a video mode change -vm.

Useful for multihead setups. Do not keep window aspect ratio when resizing windows. Only works with the x11, xv, xmga, xvidix, directx video output drivers.

Furthermore under X11 your window manager has to honor window aspect hints. Makes the player window stay on top of other windows. Enables pan-and-scan functionality cropping the sides of e. The range controls how much of the image is cropped. NOTE: Values between -1 and 0 are allowed as well, but highly experimental and may crash or worse. Use at your own risk! Change the range of the pan-and-scan functionality default: 1. Positive values mean multiples of the default range. This feature is experimental.

When black borders are added to adjust for aspect, this determines where they are placed. Values outside the range 0. Rotate display by 90, or degrees.

Rotates also the OSD, not just the video image itself. Currently only supported by the gl video output driver. Set the monitor refreshrate in Hz.

Currently only supported by -vo directx combined with the -vm option. Play movie in the root window desktop background. Desktop background images may cover the movie window, though. Only works with the x11, xv, xmga, xvidix, quartz, corevideo and directx video output drivers.

Adjust the saturation of the video signal default: 0. You can get grayscale output with this option. Specify the screen height for video output drivers which do not know the screen resolution like fbdev, x11 and TV-out. Specify the screen width for video output drivers which do not know the screen resolution like fbdev, x11 and TV-out. Turns off xscreensaver at startup and turns it on again on exit default: enabled. Set the window title using the media filename, when not set with -title.

Supported by Xbased video output drivers. Try to change to a different video mode. Supported by the dga, x11, xv, sdl and directx video output drivers. If used with the directx video output driver the -screenw, -screenh, -bpp and -refreshrate options can be used to set the new display mode.

This tells MPlayer to attach to an existing window. Useful to embed MPlayer in a browser e. This option fills the given window completely, thus aspect scaling, panscan, etc are no longer handled by MPlayer but must be managed by the application that created the window. In Xinerama configurations i.

A value of -2 means fullscreen across the whole virtual display in this case Xinerama information is completely ignored , -1 means fullscreen on the display the window currently is on.

The initial position set via the -geometry option is relative to the specified screen. Will usually only work with "-fstype -fullscreen" or "-fstype none". This option is not suitable to only set the startup screen because it will always display on the given screen in fullscreen mode , -geometry is the best that is available for that purpose currently. Display in black and white. Select a part of the input image to display, multiple occurrences of this option switch on cinerama mode.

In cinerama mode the movie is distributed over more than one TV or beamer to create a larger image. Options appearing after the n-th -zrcrop apply to the n-th MJPEG card, each card should at least have a -zrdev in addition to the -zrcrop.

For examples, see the output of -zrhelp and the Zr section of the documentation. Specify the device special file that belongs to your MJPEG card, by default the zr video output driver takes the first v4l device it can find.

Force decimation: Decimation, as specified by -zrhdec and -zrvdec, only happens if the hardware scaler can stretch the image to its original size.

Use this option to force decimation. A number from 1 best to 20 worst representing the JPEG encoding quality. If the movie is smaller than the TV screen, this option specifies the x offset from the upper-left corner of the TV screen default: centered.

If the movie is smaller than the TV screen, this option specifies the y offset from the upper-left corner of the TV screen default: centered.

Video output drivers are interfaces to different video output facilities. The syntax is: -vo. NOTE: See -vo help for a list of compiled-in video output drivers. Available video output drivers are: xv X11 only.

Uses the XVideo extension of XFree86 4. If you cannot use a hardware specific driver, this is probably the best option. In fact, it's quite interesting to see the issues are still kind of unresolved to this day. It's just that usage of audio CDs has dropped so much, that people simply don't run into those issues anymore.

The cache "trick" is actually not a bad one at all. Sign up or log in Sign up using Google. Sign up using Facebook. Sign up using Email and Password. Post as a guest Name. Email Required, but never shown.

The Overflow Blog. Podcast Making Agile work for data science. Stack Gives Back Featured on Meta. New post summary designs on greatest hits now, everywhere else eventually. Related Hot Network Questions. This means that every time you visit this website you will need to enable or disable cookies again.

MPlayer Download. Developer :. Free Download. MPlayer — Key Features Supports most common media format and resolutions Compatible with classic disc media files Built-in subtitle downloader Supports most streaming protocols Available for almost all audio and video codecs MPlayer — Major features and functionalities Supports most common media format and resolutions MPlayer supports the most common media formats and resolutions.

Compatible with classic disc media files MPlayer is compatible with the widely used media formats extracted from classic discs.

Built-in subtitle downloader Watching movies on home entertainment systems and devices has become the norm nowadays. Supports most streaming protocols Mplayer supports streaming content across different protocols. Privacy Overview This website uses cookies so that we can provide you with the best user experience possible. Strictly Necessary Cookies Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.